ETS-Lindgren 2171B Boresight Antenna Tower - Manual (Page 12)

12 | Introduction

Fiber Optic Control Cables: 3- and 10-meter

Fiber Optic Shield Room Penetration Kit: Routes the fiber optic control cable
from the control room to the shield room while maintaining shielding attenuation.
The pieces are made of brass for conductivity and provide attenuation of greater
than 100 dB at 10 GHz. A single 25-mm (1.0-in) hole is required for mounting.
Optional Items
O FFSET B OOM
An optional offset boom is available (part# 118617). Contact ETS-Lindgren Sales
Department for more information.
A DDITIONAL F IBER O PTIC C ABLE
Various lengths of fiber optic cable are available by custom order. The standard
length provided is 10 m (32.8 ft).
ETS-Lindgren Product Information Bulletin
See the ETS-Lindgren Product Information Bulletin included with your shipment
for the following:

Warranty information
 Safety, regulatory, and other product marking information
 Steps to receive your shipment

Steps to return a component for service
 ETS Lindgren calibration service
 ETS Lindgren contact information