ETS-Lindgren 2171B Boresight Antenna Tower - Manual (Page 47)

Operation | 47
7.0 Operation
Before placing into operation, follow the safety information in the
ETS-Lindgren Product Information Bulletin included with your
shipment.
This equipment should be installed, operated, and maintained by
qualified personnel.
Stay clear of all moving components on this equipment.
Never stand beneath the carrier, whether moving or stationary.
The stationary cam link assembly should never be attached to the carrier when
using the boresight.
Pre-Operational Checklist
□
Verify that the power lines are connected for the tower, controller, and any
other equipment to be used for testing.
□
Verify the fiber optic cables are connected.
□
Verify the antenna connected to the boom is securely mounted.
□
Connect the feed cable to the antenna.
□
Before moving the carrier on the mast up or down, verify there are no
people standing near the boom.