ETS-Lindgren HI-6100 Field Monitor - Manual (Page 53)

Remote Operation | 53
—Setup Save
Saves the HI-6100 current configuration into memory.
Syntax: SAVE,x
Parameters: (x)
1 = Saves to setup #1 3 = Saves to setup #3
2 = Saves to setup #2 4 = Saves to setup #4
To save the current configuration to setup #1: SAVE,1<LF>
The setup will be saved to memory and can be recalled with the command
RECL,1.
—Software Revision
Returns the current revision of the HI-6100 operating software.
Syntax: SREV
Parameters: None
To check the current revision of the HI-6100 software: SREV?<LF>
Response: SREV,1.0<CR><LF>