ETS-Lindgren HI-6100 Field Monitor - Manual (Page 54)

54 | Remote Operation
—Verbose Mode
Sets the HI-6100 to respond to all remote commands or to respond to inquiries
only.
Syntax: VERB,x
Parameters: (x)
0 = Verbose mode disabled 1 = Verbose mode on
Examples
 To enter verbose mode:
VERB,1<LF>
Response: -VERB,1<CR><LF>
 To disable verbose mode:
VERB,0<LF>
Response: The HI-6100 will not respond (verbose mode off).
—Last Errors
Syntax: LERR?
Parameters: None
To see the last errors: LERR?<LF>
Response
 The HI-6100 will respond with the same information as displayed in the
GPIB and probe list box errors.
 If no errors are logged, the HI-6100 will respond with:
NO errors logged.<CR><LF>