Lights and windshield wipers, Exterior lighting – Mercedes-Benz GL-Class 2013 Owners Manual User Manual

Page 127

Advertising
background image

automatically if there is fog, snow or other

causes of poor visibility due to the weather

conditions such as spray. There is a risk of an

accident.
In such situations, turn the light switch to

L.

The automatic headlamp feature is only an

aid. The driver is responsible for the vehicle's

lighting at all times.

1W

Left-hand standing lamps

2X

Right-hand standing lamps

3T

Parking lamps, license plate and

instrument cluster lighting

Automatic headlamp mode,

controlled by the light sensor

5L

Low-beam/high-beam headlamps

BR

Rear fog lamp

à is the favored light switch setting. The

light setting is automatically selected

according to the brightness of the ambient

light (exception: poor visibility due to weather

conditions such as fog, snow or spray):

R

SmartKey in position 1 in the ignition lock:

the parking lamps are switched on or off

automatically depending on the brightness

of the ambient light.

R

With the engine running: if you have

activated the daytime running lamps

function via the on-board computer, the

daytime running lamps or the low-beam

headlamps and parking lamps are switched

on or off automatically depending on the

brightness of the ambient light.

X

To switch on automatic headlamp

mode: turn the light switch to Ã.

Only for Canada:
The daytime running lamps improve the

visibility of your vehicle during the day. The

daytime running lamps function is required by

law in Canada. It cannot therefore be

deactivated.
When the engine is running and the vehicle is

stationary: if you move the selector lever from

a drive position to P, the daytime running

lamps/low-beam headlamps go out after

three minutes.
When the engine is running, the vehicle is

stationary and in high ambient light: if you

turn the light switch to T, you turn on the

daytime running lamps and parking lamps.
If the engine is running and you turn the light

switch to L, the manual settings take

precedence over the daytime running lamps.
USA only:
The daytime running lamps improve the

visibility of your vehicle during the day. To do

this, the daytime running lamps function must

be switched on using the on-board computer

(

Y

page 278).

If the engine is running and you turn the light

switch to T or L, the manual settings

take precedence over the daytime running

lamps.

i

In the USA, the daytime running lamps are

deactivated upon delivery from the factory.

Low-beam headlamps

G

WARNING

When the light switch is set to Ã, the low-

beam headlamps may not be switched on

automatically if there is fog, snow or other

causes of poor visibility due to the weather

conditions such as spray. There is a risk of an

accident.
In such situations, turn the light switch to

L.

Exterior lighting

125

Lights

and

windshield

wipers

Z

Advertising