Mercedes-Benz GL-Class 2013 Owners Manual - Manual (Page 136)

Tail lamp
:
Brake lamp: P 21 W-L
Changing the front bulbs
Removing and installing the cover in the
front wheel housing
You must remove the cover from the front
wheel housing before you can change the
front bulbs.
X To remove: switch off the lights.
X
Turn the front wheels inwards.
X
Remove securing pin ; using a suitable
tool.
X Slide cover : up and remove it.
X To install: insert cover : again and slide
it down until it engages.
X Insert securing pin ;.
Low-beam headlamps (halogen
headlamps)
G WARNING
These bulbs are pressurized.
They can explode when being changed if:
R they are still hot
R they hit an object when being removed
R they are dropped
There is a risk of injury.
You should wear eye protection and clean
gloves when you are changing a bulb. If
necessary, have bulbs changed at a qualified
specialist workshop.
X Remove the cover in the front wheel
housing (
Y
page 134).
X
Turn housing cover : counter-clockwise
and pull it out.
X Turn bulb holder ; counter-clockwise and
pull it out.
X Take the bulb out of bulb holder ;.
X Insert the new bulb into bulb holder ;.
X Insert bulb holder ; into the lamp and turn
it clockwise.
X
Align housing cover : and turn it
clockwise until it engages.
X Replace the cover in the front wheel
housing (
Y
page 134).
134
Replacing bulbs
Lights
and
windshield
wipers