Driv ing and pa rki ng, Driving systems – Mercedes-Benz GL-Class 2013 Owners Manual User Manual

Page 233

Advertising
background image

Activation conditions

The 360° camera image can be displayed if:

R

your vehicle is equipped with a 360°

camera

R

COMAND is switched on, see the separate

COMAND operating instructions

R

the

360° camera

function is activated

Activating the 360° camera using the

SYS button

X

Press and hold the W button for longer

than 2 seconds, see the separate COMAND

operating instructions.

Depending on whether position D or R is

engaged, the following is shown:

R

full screen display with the image from

the front camera

R

full screen display with the image from

the rear camera

Activating the 360° camera with

COMAND

X

Press the W button, see the separate

COMAND operating instructions.

X

Select

System

by turning cVd the

COMAND controller and press W to

confirm.

X

Select

360° camera

and press W to

confirm.

Depending on whether position D or R is

engaged, the following is shown:

R

a split screen with top view and the

image from the front camera or

R

a split screen with top view and the

image from the rear view camera

For further information about the COMAND

Controller, see the separate COMAND

operating instructions.

Activating the 360° camera using

reverse gear

The 360° camera images can be

automatically displayed by engaging reverse

gear.

X

Make sure that the SmartKey is in position

2 in the ignition lock.

X

Make sure that the

Activation by R

gear

setting is active in COMAND, see the

separate COMAND operating instructions.

X

To show the 360° camera image: engage

reverse gear.

The COMAND display shows the area

behind the vehicle in split screen:

R

vehicle with guide lines

R

top view of the vehicle

Selecting the split-screen and full

screen displays

X

To switch between split screen views:

switch to the line with the vehicle icons by

sliding ZV the COMAND controller.

X

Turn cVd the COMAND controller and

select one of the vehicle symbols.

X

To switch to full screen mode: select

Full screen

by turning cVd the

COMAND controller and press W to

confirm.

Displays in the COMAND display

Important safety notes

!

Objects not at ground level may appear to

be further away than they actually are, e.g.:

R

the bumper of a parked vehicle

R

the drawbar of a trailer

R

the ball coupling of a trailer tow hitch

R

the rear section of an HGV

R

a slanted post

Use the guidelines only for orientation.

Approach objects no further than the

bottom-most guideline.

Driving systems

231

Driv

ing

and

pa

rki

ng

Z

Advertising