Safety, Driving safety systems – Mercedes-Benz GL-Class 2013 Owners Manual User Manual

Page 76

Advertising
background image

An intermittent warning tone will then sound

and the · distance warning lamp will light

up in the instrument cluster.

X

Brake immediately in order to increase the

distance from the vehicle in front.

or

X

Take evasive action provided it is safe to do

so.

From a speed of approximately

4 mph (7 km/h), if the driver and front

passenger have fastened their seat belts,

PRE-SAFE

®

Brake can brake the vehicle

automatically at speeds up to approximately

124 mph (200 km/h).
Due to the nature of the system, particularly

complicated driving conditions may cause

unnecessary warnings or the unnecessary

intervention of PRE-SAFE

®

Brake.

You can prevent the intervention of the PRE-

SAFE

®

Brake at any time by:

R

depressing the accelerator pedal further

R

activating kickdown

R

releasing the brake pedal

The braking action of PRE-SAFE

®

Brake is

ended automatically if:

R

you maneuver to avoid the obstacle.

R

there is no longer any danger of a rear-end

collision.

R

there is no longer an obstacle detected in

front of your vehicle.

If you have activated DSR (

Y

page 250), PRE-

SAFE

®

Brake is deactivated.

At speeds of up to approximately 40 mph

(70 km/h), PRE-SAFE

®

Brake can also detect

stationary objects. Examples of stationary

objects are stopped or parked vehicles.
If you approach an obstacle and PRE-SAFE

®

Brake detects a risk of a collision, the system

will alert you both visually and acoustically. If

you do not brake or take evasive action, the

system will warn you by automatically braking

the vehicle gently. If there is an increased risk

of collision, preventative passenger

protection measures (PRE-SAFE

®

) are

activated (

Y

page 54). If, at speeds over

20 mph (30 km/h), a risk of collision remains

and you do not brake, take evasive action or

significantly accelerate, automatic braking

may be performed up to a level of automatic

emergency braking. Automatic emergency

braking is not performed until immediately

prior to an accident that can no longer be

avoided.

G

WARNING

PRE-SAFE

®

Brake will initially brake your

vehicle by a partial application of the brakes

if a danger of collision is detected. There may

be a collision unless you also brake.

Automatic emergency braking cannot prevent

a collision. There is a risk of an accident.
Always apply the brakes yourself and try to

take evasive action.

G

WARNING

PRE-SAFE

®

Brake cannot always clearly

identify objects and complex traffic

conditions.
In these cases, PRE-SAFE

®

Brake may:

R

give an unnecessary warning and then

brake the vehicle

R

not give a warning or intervene

There is a risk of an accident.
Always pay particular attention to the traffic

situation and be ready to brake, especially if
PRE-SAFE

®

Brake warns you. Terminate the

intervention in a non-critical driving situation.

In particular, the detection of obstacles can

be impaired if:

R

there is dirt on the sensors or anything else

covering the sensors

R

snow or heavy rain

R

interference by other radar sources

R

there are strong radar reflections, for

example in parking garages

74

Driving safety systems

Safety

Advertising