Safet y, Occupant safety – Mercedes-Benz GL-Class 2013 Owners Manual User Manual

Page 59

Advertising
background image

X

Adjust the seat and move the backrest to

an almost vertical position (

Y

page 102).

X

Pull the seat belt smoothly through belt

sash guide :.

X

Without twisting it, guide the shoulder

section of the seat belt across the middle

of your shoulder and the lap section across

your pelvis.

X

Engage belt tongue ; in buckle =.

Seat-belt adjustment: if necessary, the

driver's and front-passenger seat belts

automatically adjust to the upper body

(

Y

page 57).

X

If necessary, adjust the seat belt to the

appropriate height (

Y

page 57).

X

If necessary, pull upwards on the shoulder

section of the seat belt to tighten the belt

across your body.

All seat belts except the driver's seat belt are

equipped with a special seat belt retractor to

securely fasten child restraint systems in the

vehicle. Further information can be found

under "Special seat belt retractor"

(

Y

page 62).

For more information about releasing the seat

belt with release button ?, see "Releasing

seat belts" (

Y

page 58).

Seat belt adjustment

The seat-belt adjustment function adjusts the

driver's and front-passenger seat belt to the

upper body of the occupants.
The belt strap is tightened slightly when:

R

you engage the belt tongue in the belt

buckle and you then turn the SmartKey to

position 2 in the ignition lock.

R

the SmartKey is in position 2 in the ignition

lock and you then engage the belt tongue

in the buckle.

The seat-belt adjustment will apply a

retraction force if any slack is detected

between the occupant and the seat belt. Do

not hold on to the seat belt tightly while it is

adjusting. You can switch the seat-belt

adjustment on and off in the on-board

computer (

Y

page 281).

The seat-belt adjustment is an integral part of

the PRE-SAFE

®

convenience function. More

information about PRE-SAFE

®

can be found

under "PRE-SAFE

®

(preventative occupant

protection)" (

Y

page 54).

Belt height adjustment

You can adjust the seat belt height on the

front seats. Adjust the belt to a height that

allows the upper part of the seat belt to be

routed across the center of your shoulder.

X

To raise: slide the belt sash guide upwards.

The belt sash guide engages in various

positions.

X

To lower: press and hold belt sash guide

release :.

Occupant safety

57

Safet

y

Z

Advertising