Lights and windshie ld wipers, Replacing bulbs – Mercedes-Benz GL-Class 2013 Owners Manual User Manual

Page 135

Advertising
background image

Crash-responsive emergency lighting

The interior lighting is activated automatically

if the vehicle is involved in an accident.

X

To switch off the crash-responsive

emergency lighting: press the hazard

warning lamp button.

or

X

Lock and then unlock the vehicle using the

SmartKey.

Replacing bulbs

Important safety notes

Xenon bulbs

G

DANGER

Xenon bulbs carry a high voltage. You can get

an electric shock if you remove the cover of

the Xenon bulb and touch the electrical

contacts. There is a risk of fatal injury.
Never touch the parts or the electrical

contacts of the Xenon bulb. Always have work

on the Xenon bulbs carried out at a qualified

specialist workshop.

If your vehicle is equipped with Xenon bulbs,

you can recognize this by the following: the

cone of light from the Xenon bulbs moves

from the top to the bottom and back again

when you start the engine. For this to be

observed, the lights must be switched on

before starting the engine.
Bulbs and lamps are an important aspect of

vehicle safety. You must therefore make sure

that these function correctly at all times.

Have the headlamp setting checked regularly.

Other bulbs

G

WARNING

Bulbs, lamps and connectors can get very hot

when operating. If you change a bulb, you

could burn yourself on these components.

There is a risk of injury.

Allow these components to cool down before

changing a bulb.

There are bulbs other than the Xenon bulbs

that you cannot replace. Replace only the

bulbs listed (

Y

page 133). Have the bulbs that

you cannot replace yourself changed at a

qualified specialist workshop.
If you require assistance changing bulbs,

consult a qualified specialist workshop.
Do not touch the glass tube of new bulbs with

your bare hands. Even minor contamination

can burn into the glass surface and reduce

the service life of the bulbs. Always use a lint-

free cloth or only touch the base of the bulb

when installing.
Only use bulbs of the correct type.
If the new bulb still does not light up, consult

a qualified specialist workshop.
Bulbs and lamps are an important aspect of

vehicle safety. You must therefore make sure

that these function correctly at all times.

Have the headlamp setting checked regularly.

Overview: changing bulbs/bulb types

You can change the following bulbs. The bulb

type can be found in the legend.

Halogen headlamps
:

Low-beam headlamp: H7 55 W

;

High-beam headlamp: H7 55 W

Replacing bulbs

133

Lights

and

windshie

ld

wipers

Z

Advertising