Breakdown assistance, Flat tire – Mercedes-Benz GL-Class 2013 Owners Manual User Manual

Page 385

Advertising
background image

Vehicles with a "Minispare" emergency

spare wheel

:

Alignment bolt

;

Velcro fastener

=

Folding wheel chock

?

Ratchet wrench

A

Lug wrench

B

Jack

C

Wheel bolts

D

Towing eye

X

Lift the cargo compartment floor up

(

Y

page 343).

Flat tire

Preparing the vehicle

Your vehicle may be equipped with:

R

MOExtended tires (tires with run-flat

properties) (

Y

page 384)

Vehicle preparation is not necessary on

vehicles with MOExtended tires.

R

a TIREFIT kit (

Y

page 382)

R

an emergency spare wheel (only for certain

countries) (

Y

page 434)

Information on changing/mounting a wheel

(

Y

page 423).

X

Stop the vehicle on solid, non-slippery and

level ground, as far away as possible from

traffic.

X

Switch on the hazard warning lamps.

X

Secure the vehicle against rolling away

(

Y

page 183).

X

If possible, bring the front wheels into the

straight-ahead position.

X

Vehicles with the ON&OFFROAD

package: make sure that highway level is

selected (

Y

page 207).

X

Switch off the engine.

X

Vehicles without KEYLESS-GO: remove

the SmartKey from the ignition lock.

X

Vehicles with KEYLESS-GO: open the

driver's door.

The on-board electronics now have status

0. This is the same as the key having been

removed.

X

Vehicles with KEYLESS-GO: remove the

Start/Stop button from the ignition lock

(

Y

page 163).

X

All occupants must get out of the vehicle.

Make sure that they are not endangered as

they do so.

X

Make sure that no one is near the danger

area while a wheel is being changed.

Anyone who is not directly assisting in the

wheel change should, for example, stand

behind the barrier.

X

Get out of the vehicle. Pay attention to

traffic conditions when doing so.

X

Close the driver's door.

X

Unload heavy luggage.

i

Only operate the tire inflation compressor

using a 12 V socket, even if the ignition is

turned off (

Y

page 348).

An emergency cut-out ensures that the on-

board voltage does not drop too low. If the

on-board voltage is too low, the power to

the sockets is automatically cut. This

ensures that there is sufficient power to

start the engine.

Flat tire

383

Breakdown

assistance

Advertising