QOMO QRF900 User Manual - Manual (Page 102)

Copyright © 2008 -2010 All Rights Reserved by QOMO HiteVision.
www.qomo.com 102
To create a new test answer frame, follow these steps:
1) “Exam ID:” The ID will be used to identify the homework when the homework is submitted
and the ID is also used for identification when searching for an exam later. The ID will be
assigned if the exam is in electronic format which is delivered through the software when
the instructor chooses the Homework or Paper Quiz Mode. If an exam is distributed in
paper format, the exam ID will be assigned by the instructor and the ID will be entered
manually by the students using their keypads.
2) “Total Questions:” This refers to the number of questions. This item will determine how
many questions are in an exam. The number of questions will be assigned if the exam is in
electronic format, delivered through the Software when you choose the Homework or
Paper Quiz Mode. If the exam is distributed in paper format, the number of questions will
need to be filled in by the students to match the total number of questions assigned in the
paper.
3) “Exam Name:” This is used for easily locating an exam later. The QClick Software does
not use this information. Therefore, it can be assigned by students to any easily
remembered text title.
4) When these settings are complete, press the “Menu/OK” key . The homework question
scr een will be displayed. Press “Return” “Right Soft Key” , to return to the previous
menu.
5) You may start to work on the questions and save the answers to the keypad and then
submit them the next day in the class; or just save the question frames to work on them
later.
3.1.2.2.8
Student’s keypad special functions
(1) Hardware Test