QOMO QRF900 User Manual - Manual (Page 14)

Copyright © 2008 -2010 All Rights Reserved by QOMO HiteVision.
www.qomo.com 14
 Blue/Orange color – indicates response signal received. The color is toggled between blue
and orange each time the answer is changed, the system only record the last response
received before the test ends.
Tool Status Bar:
1. Control Buttons:
 Start/Pause – to start or pause the timer
 Stop – to stop the time
 Previous – return to the previous question page
 Next – turn to the next question page
 Exit – exit the current quiz session
 F1 –Controls the Register/Answering Status Bar size, by continuing on pressing the
button you will cycle the size from large to small and then disappear.
 F2 –Controls the Register/Answering Status Bar position, by continuing on pressing
the button it will allow you to cycle the position from top, left and right.
 Report/ Result / Display the instant report and result. Refer to session
2.1.1.7 Result and Report.
Note: All these control buttons are duplicated and displayed on the instructor remote keypad.
2. The Question Answer Timer:
 The timeout value is selected for each question during the quiz file set up.
 Timer box background colors are: Black: Stop ; Green: Running ; Yellow: Pause .
 The left up/down button will reset the Minute time: Press the up or down button on
the left side of the timer box to increase or decrease the Minute timer setting.
 The right up/down button will reset the Second timer: Press the up or down button
on the right side of the timer box to increase or decrease the Second timer setting.
3. Quiz Status:
 Activity Mode: Indicates the current activity you selected.
 Hand Raise: Indicates the number of students who use the raise hand function in their
keypad.