QOMO QRF900 User Manual User Manual
Page 95
Copyright © 2008 -2010 All Rights Reserved by QOMO HiteVision.
www.qomo.com
95
3.1.2.2.6 Functions and Operations
(1)
Setting the Student ID and the User Name
Note: Before logging in, a valid Student ID and user name (stored in the class database) must be set
for each student keypad. The Student ID is used in the software but the user name is not used in the
software.
To set a Student ID, follow these steps:
1.
Under the NoHost screen, press the “Menu Key/OK”
to enter into the main menu.
2.
Select “4.SetStudentID” submenu or directly press number “4”.
3.
Under the “SetStudentID” screen, enter a valid Student ID and then press the “Menu
Key/OK
”
to save it. The Student ID can be the combination of numeric and alpha.
To set a username, follow these steps:
1. Under the NoHost screen, press the
“Menu/OK” key
to enter into the main menu.
2.
Select “5.SetUserName” submenu or directly press number “5”.
3.
Under the “SetUserName” screen, enter a valid user name and press the “Menu/OK” key
to save.
Note: All submenu items can be selected by directly pressing their corresponding item numbers
displayed at the front of each item.
(2)
Login to a class:
To login to a class, follow these steps:
Under the NoHost screen
, select the “Login” right soft key
to directly login to your class.
OR
1.
Under the NoHost screen, press the
“Menu/OK” key
to enter the main menu.
2.
Select “Login” to login into your class.