QOMO QRF900 User Manual - Manual (Page 6)

Copyright © 2008 -2010 All Rights Reserved by QOMO HiteVision.
www.qomo.com 6
Using the QClick Software
2.1 Quiz Genius
Note:
One PPT file = one quiz paper
One slide = one question
Run the QClick program by double clicking the QClick icon on the desktop. If the QRF900
receiver is plugged into the USB port, the software will automatically switch to QRF900 software.
Otherwise, the software will prompt you from a system selection window. You may plug the QRF900
main receiver into the USB port at this time. The software will automatically switch to QRF900
system and display the logon window. If you don‟t have the hardware, but would like to practice
using the QRF900 software system, you may select the system QRF900 from the system selection
drop-down menu. Next, logon to the QClick system by typing the user name and the password. The
software sets the default login user name to “qomo” and the password is also “qomo”. If you do not
want to logon the system, click the Cancel button. The software will allow you to do some limited
operations, however the system database will not be updated.
Note: The QClick software monitors the QRF900 main receiver plug-in status all the time. It will
either display “QRF900 No Host” for Offline and “QRF900 Connected” for Online.
Once the application is running, the software displays the above control Tab windows, Quiz Genius,
Exam Editor, Template design, Reports, and Settings on the top of the screen. The active default
Tab is set to Quiz Genius.
Before conducting a quiz, you need to set up a class. If the class information is not available at this
time but if you intend to use the system casually, you may choose some software preset examples
for classes, subjects and teachers. The student roster table always goes with the class selection.
The roster includes the student ID number, name and grouping information. The student profile is
embedded under the student record.