Hardware test, 3 hardware test – QOMO QRF900 User Manual User Manual
Page 86
Advertising
Copyright © 2008 -2010 All Rights Reserved by QOMO HiteVision.
www.qomo.com
86
To set up the main receiver channel, follow these steps:
1. Select the Settings Tab.
2. Click the Channel
icon; this will display the Set Channel window.
3. If a main receiver is plugged into a USB port, the channel number of the receiver will be
displayed on the Set Channel text box. Click on the text box to enter the channel number
you desire for the main receiver. Then click on the Send
button to send the
change to the main receiver. The valid channel number is 0 to 40.
2.5.3 Hardware Test:
The Hardware test is used to check the communication of the main receiver, instructor remote
control, and the student keypad.
Advertising