QOMO QRF900 User Manual - Manual (Page 32)

Copyright © 2008 -2010 All Rights Reserved by QOMO HiteVision.
www.qomo.com 32
To use the Template Design, follow these steps:
1. Select Template Design Tab.
2. To edit an existing template design file, click the Open button; this will display your
file browser and allow you to choose a file.
3. To create a new Template Model file, click the New button; and a blank PowerPoint
slide will displays.
4. Click the Add button; the software will display a system question Template list with
different alignment options. Select the template option by clicking on it, and the selected
template will be added to your template design file.
5. To add a name or identification for new slides; click on the Template Name text box to enter
the name for the current design template being edited, and then press the “Enter” key.
6. Typically, a new template will be displayed in the template list in alphabetical order. If you
choose to re-assign the placement, click the block you desire to assign on the PowerPoint
Slide display (Question Title, Options…) and then click the Option Assignment drop-down
list to select either “Question Title” or “Options”. For example, if you want the first option
block to be assigned to option B, click and select the first option block and then click the
Option Assignment drop-
down to select “Option B”.
7. To delete the currently edited template slide from PowerPoint template file, click the Delete
button. The software will prompt you for deletion confirmation.
8. To save the edited PowerPoint template file, click the Save button.
9. To close the edited PowerPoint template file, click the Close button. If changes have
been made, the software will ask you to save the changes, otherwise, the changes will be
lost.
The detail description for the template design control is as following:
2.3.1 Open:
The Open function will open the existing PowerPoint template file for editing. A file browser
will be displayed after clicking the Open button allowing you to choose a PowerPoint quiz file. The
template file extension is “.pot” or “x.pot”. The default loading path is: “(Installation
Path)\QClick\User\QRF900\
Module”.