QOMO QRF900 User Manual - Manual (Page 85)

Copyright © 2008 -2010 All Rights Reserved by QOMO HiteVision.
www.qomo.com 85
The audio setup allows the selection of sounds to be used when entering a quiz, starting a quiz, and
completing a quiz. If the check box is not checked, the sound will be muted for that activity.
To set up the audio sounds and the instructor remote mouse control sensitivity, follow these steps:

Select Settings Tab.

Click the System icon; this will display the System Settings window.

Click on the sound activity check boxes you desire and the Browse button will be displayed.
Click the Browse button; this will display the sound file browser. Select the desired sound file
for the activity and then click the Save button to save it into the system.

Repeat step 3, if you desire to set up additional sounds for other activities.
Note: If the check box is unchecked, the sound will be muted for that activity.
To set up the remote mouse sensitivity, move the cursor onto the indicator on the Mouse
Sensitivity Setting level bar, and then click and hold the left mouse button to drag the level
indicator to the left or right for decreasing or increasing the remote mouse sensitivity.
To set up the option of sending question contents to the student clickers, click the Send
Question(s) button to display the Send Questions Setting window. Select the radio button to
choose sending the question content or no sending the question content. The system default is set
to sending the question content. If the sending questions content is selected, the question contents
can be sent to student clicker when an activity is conducting. Otherwise, no question contents can
be sent to the student clickers when an activity is conducting.
Click the Save button to save the system setting. Then click the Close button to close the setting.
2.5.2 Channel:
The Channel setup will read the channel number of the main receiver connected to the system and
will also be used to set a new channel number for the main receiver. The channel number is preset
when a main delivered. Using the QRF900 system, any changes to the main receiver channel
number will not affect the instructor and student keypad communication because the keypad will
automatically search for the main receiver channel.