QOMO QRF900 User Manual - Manual (Page 117)

Copyright © 2008 -2010 All Rights Reserved by QOMO HiteVision.
www.qomo.com 117
To use the factory settings for the instructor keypad, follow these steps:
1. Under the Normal submenu, select “5. DefaultSet” in the submenu to restore the factory
settings.
2. Press the Menu/ok Key to confirm the operation.
3. Follow the screen prompt, and press the menu key to double confirm the setting.
3.2.2.5 Offisite Mode
The instructor clicker will consume more power when it is running in the Offsite mode. The clicker
with new batteries can last about 35 hours for continuing using under this mode. In the Offsite mode,
the instructor‟s clicker will act as the main receiver, working as the host to directly receive the
student keypad responses in a quiz session.
Before the instructor clicker can be used to conduct a
quiz session, the instructor should download at least one class setting with the student information
and at least one set of the quiz corr
ect answers into the instructor‟s keypad. The Offsite mode has
these functions:

Begin Session

Loading Info

Upload session

Class List

Exam List

Session List
3.2.2.5.1 Begin Session:
At least one class must be loaded in the instructor keypad before using the Begin Session function.
If you choose the No Free Style mode, at least one set of answers must be loaded into the keypad.
It is not necessary to have the correct answers ready when choosing the Free Style mode. To
conduct a quiz in the Offsite mode, follow these steps: