SINGER 2009 ATHENA User Manual

Page 58

Advertising
background image

56

9. When sewing is finished, use a buttonhole opener/seam

ripper to open up the fabric in the center of the buttonhole.
Be careful not to cut any of the stitching.

5. Carefully mark the position of buttonhole on your garment.

6. Place the fabric under the foot. Pull out the bobbin thread

underneath the fabric to a length of about 4 inches to the
rear.

7. Align the buttonhole mark on the fabric with the mark on

the buttonhole foot, and then lower the buttonhole foot.

8. While holding the top thread, start the machine.

Buttonhole foot alignment position
Position d’alignement du pied boutonnière
Posición de alineación del pie de ojaladora

Fabric marking

Marque du tissu

Marca de material

mark

Marque

Marca

Fabric marking

Marque du tissu

Marca de material

* Sewing will be completed automatically in the following order.

1 2 3

4 5 6 7

Advertising