Attaching ribbon with a twin needle – SINGER 6550-WORKBOOK Scholastic User Manual
Attaching Ribbon with a
By using a Twin Needle, two parallel rows of stitches can be used to
attach a ribbon while stitching.
0, no width
Transparent Satin Foot or Standard Foot
5” x 5” piece of lightweight woven fabric, with a stabilizer ironed-on
6” long piece of 1/4” wide satin ribbon
Insert the second spool pin.
Both spools of thread follow the same threading path until they reach
the eye of the needle. Thread each needle separately.
Insert the ribbon through the hole in the presser foot. Pull the ribbon
under the foot and then to the back of the foot.
Slowly sew a row of stitching on the right side of the fabric.
Maintain a slow consistent speed to ensure accurate stitching.