Overview, Ssl vpn connection, Static route – Cisco 4-Port SSL/IPSec VPN Router RVL200 User Manual

Page 106: Windows operating system (os), Mac os x, Linux os, Overview ssl vpn connection static route, Windows operating system (os) mac os x linux os, Appendix n, Access of multiple vlans over a ssl vpn tunnel

Advertising
background image

98

Access of Multiple VLANs over a SSL VPN Tunnel

4-Port SSL/IPSec VPN Router

Appendix N

Appendix N:

Access of Multiple VLANs

over a SSL VPN Tunnel

Overview

The 4-Port SSL/IPSec VPN Router (model number: RVL200)

can allow a computer on the Internet to communicate with

a local computer, even though they belong to different

Virtual Local Area Networks (VLANs).

SSL VPN Connection

Establish an SSL VPN connection between the computer

on the Internet, designated PC 1, and the RVL200. (Refer to

“Appendix B: Virtual Passage SSL VPN Client” for details.)
In the configuration example, the RVL200 assigns

192.168.1.201 to PC 1.

NOTE:

By default, the SSL VPN client is a member

of default VLAN1.

RVL00

192.168.3.201

Default VLAN1

VLAN2

WAN

192.168.1.201

SSL VPN Client Communicating with a Client Belonging to a

Different VLAN

Static Route

On the local computer, designated PC 2, configure a static

route to access a member of a different VLAN.
Follow the instructions for the operating system of PC 2.

Windows Operating System (OS)

Click Start.
Select Programs > Accessories > Command

Prompt.

1.
2.

At the cmd prompt, enter the following:
route add <destination ip> mask 255.255.255.0

<gateway ip>
Example:
route

add

192.168.3.0

mask

255.255.255.0

192.168.1.201
Press the Enter key.

Mac OS X

Click Finder.
Select Applications > Utilities > Terminal.
Enter one of the following:
sudo route add -net <destination ip> <gateway ip>

<subnet mask>
Example #1:
sudo route add -net 192.168.3.0 192.168.1.201

255.255.255.0
or
sudo route add -net <destination network> <gateway

ip>
Example #2:
sudo route add -net 192.168.3.0/24 192.168.1.201
Press the Enter key.

Linux OS

Enter the following:
route add -net <destination ip> netmask 255.255.255.0

gw <gateway ip>
Example:
route add -net 192.168.3.0 netmask 255.255.255.0 gw

192.168.1.201

3.

4.

1.
2.
3.

4.

Advertising