Cisco 4-Port SSL/IPSec VPN Router RVL200 - Manual (Page 42)

Chapter 4 Advanced Configuration
4 4-Port SSL/IPSec VPN Router
Group Name Enter a name for the new group.
Show unknown IP/MAC addresses If you do not know
a computer’s IP or MAC address, click Show unknown
IP/MAC addresses. The Unknown MAC Address List
appears.
Unknown IP Address List
IP Address
Select this option to view all LAN IP addresses.
IP Address The IP address is displayed.
Name Enter a name for the device.
Enable Select Enable to select a device.
MAC Address
Select this option to view all MAC addresses.
MAC Address The MAC address is displayed.
Name Enter a name for the device.
Enable Select Enable to select a device.
Click Apply to add the IP or MAC addresses to the group.
Click Select All to add all IP and MAC addresses. Click
Refresh to update the on-screen information. Click Close
to exit this screen and return to the Add Group screen.
Scheduling Decide when you want the content filter to
be enforced, and enter the hours and minutes in 24-hour
format. The default condition for any new content filter is
to always enforce it.
Decide which days of the week you want the content filter
to be enforced, and select the appropriate days.
Name Enter a name for a specific computer.
Type Select IP Address or MAC Address.
IP Address If you selected IP Address, enter the IP address
in the fields provided.
MAC Address If you selected MAC Address, enter the
MAC address in the fields provided.
To add an entry, click Add to list. To remove an entry from
the list, select the entry, and click the Delete selected
entry.
Click Save Settings to save your changes, or click Cancel
Changes to undo them. Click Exit to return to the Content
Filter screen.
To delete a group, select it and click Delete selected
group on the Content Filter screen. To change the settings
of a group, select it and click Edit Group.
Forbidden Domains
Block Forbidden Domains When this option is selected,
the Router will forbid access to websites on the Forbidden
Domains list.
Add To add a domain to the list, enter the address of the
domain.
Group Select the appropriate Group to which the Block
Forbidden Domains filter should apply.
To add a domain, click Add to list. To remove a domain
from the list, select the domain, and click Delete selected
domain.
Website Blocking by Keywords
Enable Website Blocking by Keywords When this
option is selected, the Router will forbid access to websites
using keywords on the Keywords list.
Add To add a keyword to the list, enter the address of the
domain.
Group Select the appropriate Group to which the Website
Blocking by Keyword filter apply.
To add a keyword, click Add to list. To remove a keyword
from the list, select the keyword, and click Delete selected
domain.
Click Save Settings to save your changes, or click Cancel
Changes to undo them.
IPSec VPN > Summary
This screen displays general information about the
Router’s IPSec VPN tunnel settings. The Router supports
a single Gateway-to-Gateway tunnel, which is a tunnel
created between two VPN Routers or other VPN devices.
IPSec VPN > Summary