Cisco 4-Port SSL/IPSec VPN Router RVL200 - Manual (Page 89)

8
Deployment in an Existing Network
4-Port SSL/IPSec VPN Router
Appendix H
WAN-to-LAN Connection
LAN
Corporate Network
Branch Office
RV082
LAN
WAN
WAN2
WAN1
RVL200
WAN IP: 192.168.1.2
LAN IP: 192.168.2.1
Remote users with 192.168.1.x
Virtual Passage IP can access the
headquarters’ corporate network
using Virtual Passage via the
WAN IP of the RV082.
WAN1
WAN2
Corporate Network
LAN: 192.168.1.100-
192.168.1.200
Headquarters
RV082
RVL200 WAN to RV082 LAN
To connect the RVL200 WAN to the RV082 LAN:
Physically connect the Internet port on the RVL200 to
a LAN port on the RV082.
Configure the Virtual Passage IP so it is in the network
range of the RV082 LAN side.
After an SSL VPN client establishes its connection, the
client can access the existing computers and servers
(192.168.1.100-200) on the RV082 LAN side.
1.
2.