Cisco 4-Port SSL/IPSec VPN Router RVL200 - Manual (Page 59)

Chapter 4 Advanced Configuration
 4-Port SSL/IPSec VPN Router
your Internet access disconnects. The default is 
minutes.
If you select the Keep alive option, the Router will keep
the connection alive by sending out a few data packets
periodically, so your ISP thinks that the connection is
still active. This option keeps your connection active
indefinitely, even when it sits idle. The default Redial
Period is 0 seconds.
Click Next to continue, and proceed to step 5. Click
Previous if you want to return to the previous screen.
Click Exit if you want to exit the Setup Wizard.
Connect on Demand or Keep Alive
If you want to save your changes, click Save Settings.
Click Previous if you want to return to the previous
screen. Click Exit if you want to exit the Setup Wizard.
Save Settings
Access Rule Setup
Click Launch Now to run the Access Rule Setup
Wizard.
5.
1.
This screen explains the Access Rules, including the
Router’s Default Rules. Click Next to continue. Click
Exit if you want to exit the Setup Wizard.
Access Rules Policy
From the drop-down menu, select Allow or Deny
depending on the intent of the Access Rule.
Click Next to continue. Click Previous if you want to
return to the previous screen. Click Exit if you want to
exit the Setup Wizard.
Select the Action
2.
3.