Cisco 4-Port SSL/IPSec VPN Router RVL200 - Manual (Page 71)


Virtual Passage SSL VPN Client
4-Port SSL/IPSec VPN Router
Appendix B
On the Warning screen, click Run.
Click Run
After the software is installed, you will be notified that the
SSL VPN tunnel has been established.
SSL VPN Tunnel Established
To end the SSL VPN connection, click Disconnect.
Removal of the Virtual Passage Client
(Linux OS)
To remove the Virtual Passage Client, follow these
instructions:
In the sentence, “Click here to Uninstall VPN Tunnel
client”, click the word here.
Click the Word “Here”
4.
1.
After the software is removed, you will be notified.
Click OK.
Click OK
2.