Vinten Radamec Fusion FHR-120 - Manual (Page 19)

Operators guide
17
Mounting the head onto a Quickfix ® adaptor
In situations where heads are often interchanged on pedestals and tripods, it is recommended
that a Vinten heavy-duty Quickfix adaptor (part no. 3490-3) is used. The adaptor provides an
easier and quicker method of mounting and removing heads from a pedestal or tripod (Fig. 5).
Mount the adaptor onto the pedestal or tripod mounting plate and secure into position following
the installation instructions in the Operators Guide supplied with the adaptor (publication part no.
3490-8). The Quickfix adaptor has a safety latch mechanism that is used to secure the head into
position (Fig. 6).
To mount the head onto a Quickfix adaptor, proceed as follows:
1. Push up the red safety latch and unlock the adaptor by pulling the lever fully outwards
and to the left.
Fig. 5 Mounting the head using a Quickfix adaptor
Fig. 6 Vinten heavy-duty Quickfix adaptor
Safety
button
Red safety
latch
LOCKED UNLOCKED