MK Diamond MK-101 - Manual (Page 36)

36
MK-101 TROUBleSHOOTiNG
BLADE WILL NOT CUT PROPERLY
MOVABLE CUTTING TABLE DOES NOT MOVE CORRECTLY
(D)
Verify the Roller Wheel
Assembly is tight and in
good condition.
(A)
Check the Guide Bar and
Frame for cleanliness -
clean if dirty
(A)
Check for Smoothness or
"Glazing" (See Blade Dress-
ing Section)
(B)
Check for proper blade rotation.
Ensure arrow engraved on blade
matches the directional
arrow on blade guard
(C)
Ensure the Blade Core is not bent.
Verify the blade is correct for the
material being used