MK Diamond MK-101 - Manual (Page 38)

38
MK-101 TROUBleSHOOTiNG
BlaDe STOPS TURNiNG
(A)
Allow motor to cool and de-
press motor Overload Reset
Switch
(B)
Verify all plugs fully installed.
Check Ground Fault Circuit
Interrupter
Verify circuit breaker at least 20 amps - if not, move to 20-amp circuit.
Verify circuit breaker not tripped. If tripped, reset once.
Check power source voltage is 120V - if not 120V, move to another circuit.
NOTe: