Cisco 700 MHz - Manual (Page 28)

2-4
Installation and Upgrade Guide for Cisco Unified MeetingPlace Audio Server 6.x
OL-13417-01
Chapter 2 Installing the Cisco Unified MeetingPlace 8100 Series Hardware
Mounting the Cisco Unified MeetingPlace 8100 Series
Step 2 Attach the Cisco Unified MeetingPlace 8106 to the rack. The Cisco Unified MeetingPlace 8106 comes
with screws to attach the mounting brackets to the rack. See
Figure 2-1 .
Figure 2-1 Mounting the Cisco Unified MeetingPlace 8106 in a Frame-Relay Rack
Mounting the Cisco Unified MeetingPlace 8112 in a 19- or 23-Inch Frame-Relay
Rack
To Mount the Cisco Unified MeetingPlace 8112 in a 19- or 23-Inch Frame-Relay Rack
Step 1 Attach two mounting brackets to the front mounting holes of the Cisco Unified MeetingPlace 8112. See
Figure 2-2 below.
• For 19-inch racks, fasten the long side of the bracket to the Cisco Unified MeetingPlace 8112.
• For 23-inch racks, fasten the short side of the bracket to the Cisco Unified MeetingPlace 8112.
Step 2 Slide the Cisco Unified MeetingPlace 8112 into the front of the rack.
Step 3 Attach the Cisco Unified MeetingPlace 8112 to the rack and secure it by using the eight Phillips-head
screws that shipped with the Cisco Unified MeetingPlace 8112.
Step 4 Attach two mounting brackets to the rear mounting holes of the Cisco Unified MeetingPlace 8112. See
Figure 2-2 below.
• For 19-inch racks, fasten the long side of the bracket to the Cisco Unified MeetingPlace 8112.
• For 23-inch racks, fasten the short side of the bracket to the Cisco Unified MeetingPlace 8112.
Step 5 Secure the rear mounting bracket to the rack with the eight Phillips-head screws that shipped with the
Cisco Unified MeetingPlace 8112.