Cisco 700 MHz - Manual (Page 69)

C H A P T E R
4-1
Installation and Upgrade Guide for Cisco Unified MeetingPlace Audio Server 6.x
OL-13417-01
4
Upgrading the Cisco Unified MeetingPlace
Audio Server Software
This chapter describes how to upgrade the Cisco Unified MeetingPlace Audio Server software from
Release 5.3 or 5.4 to Release 6.0 and contains the following sections:
• Upgrading the Cisco Unified MeetingPlace Audio Server Software to Release 6.0, page 4-1
• Testing the Upgrade, page 4-3
Upgrading the Cisco Unified MeetingPlace Audio Server
Software to Release 6.0
If you already have the Cisco Unified MeetingPlace Audio Server hardware and are using Cisco Unified
MeetingPlace Audio Server Release 5.3 or 5.4 software, you must upgrade the Cisco Unified
MeetingPlace Audio Server software yourself if you want to use Release 6.0.
Note A Cisco Unified MeetingPlace Audio Server system running Audio Server Release 5.2 cannot upgrade
directly to Release 6.0. You must first upgrade to Audio Server Release 5.4. Then you can upgrade to
Audio Server Release 6.0.
To Upgrade the Cisco Unified MeetingPlace Audio Server Software
Step 1 Insert the upgrade CD-ROM into the CD-ROM drive.
Note If you are upgrading the software from a remote location, have someone at the site insert the
CD-ROM for you.
Step 2 If you are upgrading the software from a remote location, dial in to Cisco Unified MeetingPlace by using
the modem.
Step 3 Telnet as a technician to the Cisco Unified MeetingPlace system.
Step 4 Enter the default username and the default password. If you have changed the default password, use the
new password.