Pilz PSEN op4H-s-30-150/1 - Manual (Page 22)

PSEN op4F/H-s Series Instruction Manual
18
The following table shows, for convenience, the values of the
minimum installation distances relative to some operating distances:
Operating distance
(m)
Minimum installation
distance (m)
3 0,30
6 0,50
10 0,65
19 0,80
WARNING: the interfering device (TX
B
) must be positioned at the
same Ddo distance, calculated as shown above, even if closer to
TX
A
respect to RX
A
.