3 microsd card information and installation, Micro, Nformation and – Y-cam Cube User Manual

Page 14: Nstallation

Advertising
background image

Page 14

2.3 microSD Card Information and Installation

Applies to products: YCW005, YCB005, YCWHD5, YCBHD5, YCWHD6, YCBHD6

Adding a microSD to your Y-cam will allow you to record footage and motion alerts direct to memory card for future
review.


Please note: It is advised to insert the microSD card before any other setup begins as the card
will not be recognized if inserted once the Y-cam is turned on. Every time the card is re-
inserted, you will need to turn the power off and then on again for the card to be recognized.


If you do not have a microSD card, but plan to add one later, this is fine. When inserting the card, remember to turn
the power off from the camera, insert the card, and then power it back on.

The Y-cam officially supports microSD memory cards with capacities upto 64GB, including those labelled “SDHC”.

It is required to install the SD card into the camera and format it within the camera. This option can be found under the
Storage menu.

MicroSD Important Notes and Information

1. There is a limit to the number of rewrites possible on any MicroSD memory card. If you notice the card

becoming slow or sluggish after a reasonable usage, you will probably need to replace the microSD memory
card. You should try to avoid purchasing second-hand memory cards.

2. If the card is not recognized by the Y-cam, try formatting the microSD card via your computer and then trying it

again in the camera.

3. Images may not be recorded or read correctly if an unsupported MicroSD memory card is used with the Y-cam.
4. Carefully read the User guide, precautions on use, and any other information that was supplied with the

memory card when purchased.

5. Do not use a memory card containing data recorded by another device as this may result in the Y-cam not

functioning correctly.

6. Do not modify, overwrite the data, or change the folder names of the MicroSD memory card. It may result in the

Y-cam not functioning correctly.

7. Always turn the power off to your camera before removing the microSD memory card.
8. Y-cam Solutions Ltd cannot be held liable for any loss of data or product misuse.

Advertising