Y-cam Cube - Manual (Page 61)

Page 61
6.8.3.2 Email periodic Sending
[Period interval] Time interval between snapshots.
[Snapshot from] Select snapshot stream source.
[Snapshot duration] The number of seconds that the camera should keep sending images after motion stops.
[Snapshot frame rate] The number of frames per seconds that the camera should keep sending images at when an
alarm is triggered.
[SMTP server name] Type the name or IP address of the SMTP server you want to use for sending the e-Mails. Please
note that some networks do not allow e-mail relaying. Check with your system administrator or Internet service provider
for more details.
[SMTP server port] The port number of the e-mail server (default is 25).
[Secure SSL connection] Select whether your SMPT server requires an SSL connection.
[Authentication] Select whether authentication is required by the SMTP server.
[User name] & [Password] Type the user name and password of the e-mail account you wish to use. This field is
required if your SMTP server requires authentication.