Y-cam Cube - Manual (Page 39)

Page 39
6.6.1 Wireless Setup
The Y-cam can connect to any wireless network through standard Wi-Fi connections.
Wireless Setup Options
[Wireless] - Enable or Disable the Wi-Fi adaptor.
[Search] – Click the Search button for the Y-cam to scan for available Wi-Fi networks to connect to.
A new screen will display all the wireless networks found. Select the desired network, and click Apply.
The Y-cam will automatically choose the best options for connecting to the network.
You then need to enter your Wi-Fi password.
If your network is not listed, try repositioning your Y-cam nearer to the wireless device.
If you need to, you can enter your Wi-Fi network details manually; instructions on how to do this are below:
[SSID] Type the ID of the wireless network you want to connect to or an easier option is to click “Search” and all
available Wireless Networks in range will be displayed. If your network isn’t listed, move the camera closer to your
wireless router or access point.
[Mode] Infrastructure mode or Adhoc mode:
Adhoc Mode: Select Adhoc mode when you want to connect the camera wirelessly directly to your computer.
Infrastructure Mode: Select Infrastructure mode when the camera is connected via an access point or router.
If you have connected your camera to your network via a router or switch, you will need the settings for “Infrastructure”
setup. If you have connected your camera directly to a computer, you will need the next section for “Adhoc” setup.