Y-cam Cube - Manual (Page 64)

Page 64
6.8.3.4 FTP Periodic Sending
[Period interval] Time interval between snapshots.
[Snapshot from] Select snapshot stream source.
[Snapshot duration] The number of seconds that the camera should keep sending images after motion stops.
[Snapshot frame rate] The number of frames per seconds that the camera should keep sending images at when an
alarm is triggered.
[FTP server name] Type the name or IP address of the FTP server.
[FTP server port] The port number of the FTP server (default is 21).
[Authentication] Select whether authentication is required by the FTP server. Choose “No” for anonymous access.
[User name] Type your FTP user name.
[Password] Type your FTP password.
[Re-type password] Re-type your password.
[Passive mode] Switch passive mode on or off. This is required on some FTP servers (Depends on your FTP server
settings).
[Keep Alive] Time period for which camera should be connected to the FTP server. The camera will keep the connection
with the server for the specified number of seconds after the last upload.
[Remote path] Input the file directory.
Click Apply to confirm your settings.