Y-cam Cube - Manual (Page 71)

Page 71
6.8.3.11 Send Files in Storage to FTP Server
[FTP server name] Type the name or IP address of the FTP server.
[FTP server port] The port number of the FTP server (default is 21).
[Authentication] Select whether authentication is required by the FTP server. Choose “No” for anonymous access.
[User name] Type your FTP user name.
[Password] Type your FTP password.
[Re-type password] Re-type your password.
[Passive mode] Switch passive mode on or off. This is required on some FTP servers (Depends on your FTP server
settings).
[Keep Alive] Time period for which camera should be connected to the FTP server. The camera will keep the connection
with the server for the specified number of seconds after the last upload.
[Upload bandwidth] Available bandwidth to be used to upload the contents onto the FTP Server.
[Remote path] Input the file directory.
Click Apply to confirm your settings