9 record to storage on alarm, 10 r, Ecord to – Y-cam Cube User Manual
Page 69: Torage, Ontinuously
Page 69
6.8.3.9
Record to Storage on Alarm
[Record From] Select the stream from which it should record.
[Record duration] The number of seconds that the camera should keep recording video after motion stops. If there is
any motion within this time the camera will keep recording until there is no motion for the duration of this parameter. It
can be from 5 seconds to 24 hours.
[Split duration] This specifies the maximum duration of one file. If the recording goes on for longer than this parameter
the camera will split the video into a number of files.
[Record thumbnail] Enable or disable thumbnail.
[Image file name] Name of file image snap shots are saved to
[Suffix of file name] Choose between Sequence number and Date
Click Apply to confirm your settings.