Wilbur Curtis EXPR - Manual (Page 5)

5
Configuration of Canisters
MODEL
ONE
10 LB. CANISTER
P/N CA-1113-06R
ULTRA-SLIM
P/N CA-1142-07
FOUR EXPR
A
B
C
D
E
Before mounting a whipper plate, place a dab of food grade lubricant
in the rear hole of the seal.
Shaft seals should be replaced with the groved side facing outward. Place a dab of
food grade lubricant in the rear hole of the seal, as shown below.
Whipper Plate – Shaft Seals
Rough-In Drawing