BendixKing KXP 756 - Manual (Page 26)

25
ATCRBS Transponder
KFS 576A Control Unit
by code number and/or report the
altitude at which the aircraft is
operating when an altimeter encoder
is included as part of the system.
KXP 756 Transponder operation
with the KFS 576/576A Control Unit
Caution: As with all avionics the
transponder should be turned off
while starting aircraft engine(s).
KFS 576/576A
An aircraft equipped with a KXP
756 Transponder may be located in
range and azimuth by a ground
ATCRBS radar site. The transponder
upon receiving Mode A, Mode B or
Mode C interrogations, transmits
coded returns that identify the aircraft
XPDR
X
002
ı
SBY ON ALT IDT
R
FL
ON ALT
TST SBY
OFF
I
D
T
REPLY INDICATOR
FLIGHT LEVEL
DIGIT SELECT CURSOR
STANDBY INDICATION
ON INDICATOR
ALTITUDE
MODE SWITCH
IDENT CODE/FLIGHT LEVEL TEST
IDENT INDICATOR
PHOTOCELL
IDENT BUTTON
FUNCTION SWITCH
CODE SELECT SWITCH
XPDR
X
002
ı
SBY ON ALT IDT
R
FL
ON ALT
TST SBY
I
D
T
OFF
REPLY INDICATOR
FLIGHT LEVEL
DIGIT SELECT CURSOR
STANDBY INDICATION
ON INDICATOR
ALTITUDE
MODE SWITCH
ON/OFF SWITCH
IDENT CODE/FLIGHT LEVEL TEST
IDENT INDICATOR
PHOTOCELL
IDENT BUTTON
FUNCTION SWITCH
CODE SELECT SWITCH
KFS 576 Control Unit