BendixKing KXP 756 User Manual
Page 6
5
be returned to Frequency mode from
Program mode by pressing the CHAN
button. Returning to Frequency mode
will not change the Active or Standby
frequencies from what they were prior
to entering Program mode.
Remote Transfer
Operates identically as front
panel Transfer button with the
exception that holding the Remote
Transfer button for two seconds does
not place unit in Active Entry.
Military Operation
Channel Mode
The Channel Mode operates the
same as in civil operation except the
Channel Mode does not time out and
return to the Frequency Mode.
Program Mode
The Program Mode operates the
same as in civil operation.
Default Mode
Turning the units on while holding
the Transfer button down will bring the
unit on in Active Entry and load
120.00MHz as the Active frequency.
This will aid the pilot in blind tuning the
radio in the case of display failure.
Remote Transfer
Operates identically as front
panel Transfer button with the
exception that holding the Remote
Transfer button for two seconds does
not place unit in Active Entry.
Remote Channel
Pressing the Remote
Channel button will cause the system
to enter the Channel mode of
operation and will increase the
channel from the previous channel
number used.