BendixKing KXP 756 - Manual (Page 7)

6
KFS 564
Rotate the VOL control clock-
wise from the OFF position to turn the
system on. Clockwise rotation beyond
the OFF position will increase the NAV
audio volume. Counterclockwise
rotation will decrease the audio
volume.
Frequency selection is
accomplished with the Frequency
Control knobs. Clockwise rotation will
increase the frequency and
counterclockwise rotation will
decrease the frequency. The larger
knob will change the MHz portion of
the display. At band edge (108 or
117MHz) the next 1MHz step will
cause the display to wrap around to
the opposite band edge. The smaller
NAV/VOR/ILS
knob will change the KHz portion of
the display and will wrap around at
the band edges (00 and 95) in the
same manner.
With the smaller Frequency
Control knob pushed in, frequency
selection is accomplished by entering
a frequency into the Standby display
and then transferring that frequency
into the Active window by pressing the
Transfer button. Frequency selection
may be accomplished directly in the
Active window by pulling the smaller
Frequency Control knob out, waiting
until the Standby display shows
dashes (— — —), and then entering
the desired frequency. The receiver
will remain tuned to the frequency
displayed in the Active window at all
times.
KFS 564 Control Functions
ACTIVE WINDOW
STANDBY WINDOW
ON/OFF/VOL
PHOTOCELL
TRANSFER BUTTON
FREQUENCY
CONTROL KNOBS
NAV
VOL
OFF
S
B
Y
108.00
117.95
ı