BendixKing KXP 756 - Manual (Page 8)

7
ACTIVE WINDOW
STANDBY WINDOW
ON/OFF/VOL
CHAN BUTTON
PHOTOCELL
TRANSFER BUTTON
FREQUENCY
CONTROL KNOBS
NAV
VOL
OFF
S
B
Y
CHAN
108.00
117.95
ı
KFS 564A Control Functions
Frequency Control knob will increment
or decrement the KHz portion of the
display in 50KHz steps. Rollover to
the opposite band edge occurs at 00
or 95. While in the Standby Entry
mode, the receiver remains tuned to
the frequency displayed in the Active
window at all times.
Active Entry
The Active Entry mode is entered
by pressing and holding the Transfer
button for more than 2 seconds. The
frequency displayed in the Active
window may then be changed with the
Frequency Control knobs in the same
manner as described above. The
receiver will be tuned to the frequency
displayed in the Active window at all
times.
Momentarily pressing the
Transfer button will return the control
unit to the Standby Entry mode. The
Standby frequency displayed prior to
entering the Active Entry mode
remains unchanged.
KFS 564A
On/Off and VOL Control
Rotate the VOL control clockwise
from the OFF position to turn the
system on. Clockwise rotation beyond
the OFF position will increase the NAV
audio volume. Counterclockwise
rotation will decrease the audio
volume.
Frequency Mode:
Standby Entry
Frequency selection is accomp-
lished in the Standby Entry mode by
changing the frequency displayed in
the Standby window of the display with
the Frequency Select knobs, and then
transferring the selected frequency
into the Active window by pressing the
Transfer button. The larger control
knob will increase or decrease the
MHz portion of the display in 1MHz
steps with rollover at each band edge
(108 or 117MHz). The smaller