CANOGA PERKINS 9145E10G Network Interface Device Hardware - Manual (Page 14)

9145E10G Ethernet Network Interface Device User’s Manual Introduction
9145E10G Specifications
2
1.2 9145E10G Specifications
1.2.1 Physical Characteristics
• Dimensions: 1.75" H x 8.25" W x 11.5" D (44.5 x 209.5 x 292 mm)
• Weight: 5.50 lb to 5.95 lb (2.49 Kg to 2.70 Kg) (depending on model)
1.2.2 Environmental Characteristics
• Operating Temperature: 0° to 50° C
• Operating Humidity: 0 to 90% Relative Humidity (non-condensing)
1.2.3 Power Requirements
• 24VDC (18 to 36VDC), 2 Amps
• 48VDC (36 to 72VDC), 1 Amp
• 100 VAC to 240 VAC (auto-ranging), 50/60 Hz, 1 Amp
1.2.4 Regulatory Compliance
• EN60825-1 (laser safety)
• CE Mark
• EMC Directive (EN55022 Class A, EN 55024, EN 61000-3-2/-3-3)
• ETL, cETL & LVD (U.S. UL60950, CAN/CSA C22.2 No. 60950, EN/IEC 60950)
• FCC Part 15B Class A (U.S.), ICES-003 (CAN), VCCI Class A (Japan), C-Tick
(AS/NZS 3548 - Australia)
• NEBS Level 3
1.3 Mounting Options (Reference Chapter 3 for installation procedures)
• 19-Inch or 23-Inch rack mount (single unit or two units side by side in a 1U)
• Wall Mount (face down or to either side)
• Table Top
.