1 rack mounting, 2 wall mounting, 3/(4 blank) – CANOGA PERKINS 9145E10G Network Interface Device Hardware User Manual
Page 15
Advertising
Introduction
9145E10G Ethernet Network Interface Device User’s Manual
Mounting Options (Reference Chapter 3 for installation procedures)
3/(4 Blank)
1.3.1 Rack Mounting
The customer is required to order the brackets required (see Figure 1-2) for their particular rack
installation.
Figure 1-2. 9145E10G Mounting Brackets
1.3.2 Wall Mounting
Canoga Perkins includes a mounting template in the shipping container (see Figure 1-3) to assist
the customer in mounting the 9145E10G on a wall.
Figure 1-3. Wall Mounting Template
9145E10G
8 1/8" X 11"
1.563"
5"
3"
16 1/8"
5"
1"
11"
1.563"
FRONT OF UNIT
1"
Advertising