CANOGA PERKINS 9145E10G Network Interface Device Hardware - Manual (Page 33)

Installation 9145E10G Ethernet Network Interface Device User’s Manual
Mounting Options
21
Figure 3-9. 9145E10G Wall Mount Template
3.3.3 Horizontal Flat Surface Mounting
The 9145E10G requires at least one inch of unobstructed space around the perimeter for ventila-
tion. Canoga Perkins recommends a space of 3 to 5 inches be left unobstructed to allow for SFP
module access, cable access and power connections. To install the 9145E10G on a flat surface,
place the 9145E10G on a secure flat surface such as a table, a shelf, or a desk within reach of
the power and fiber optic cables. Connect the power and fiber optic cables to the 9145E10G as
required.
9145E10G
8
¼
" X
11"
1.625"
5"
11"
FRONT
OF UNIT
1.625"
8¼"
FA
N
FA
N
1 8
“
WA
L L
INST
ALL
MOUNTING
SCRE
W
S