CANOGA PERKINS 9145E10G Network Interface Device Hardware User Manual
Page 25
Functional Description
9145E10G Ethernet Network Interface Device User’s Manual
LED Indicators
13/(14 Blank)
Table 2-5. Multipurpose Port LED Indicators
LED Name
State
Condition
SPD
Off
10Base T
Auto
Port Disabled
Green
1000BaseT
Amber
100BaseT
System Test
Red
Remote Fault (SFP Only)
Blinking Red
Invalid/Unsupported SFP installed (SFP Only)
Slow Blinking Green*
Port Enabled but No Link
L/A
Off
No link
No transmit or receive activity
Green
Link on with full duplex
Blinking Green
Transmission or receiving activity with full duplex
Amber
System test
Link up with half duplex
Blinking Amber
Transmission or receiving activity with half duplex
Red
Port Disabled
LLF
Blinking Red
No Link, but transmitting OAM packets in unidirectional mode
* Slow Blinking Green means the LED toggles between OFF and GREEN approximately once per
second.