CANOGA PERKINS 9145E10G Network Interface Device Hardware - Manual (Page 19)

Functional Description 9145E10G Ethernet Network Interface Device User’s Manual
Service Data Ports
7
2.2.2 Rear Panel
Customers will also have a selection of power options to choose from (see Figure 2-2). Five
options are offered:
1. Single AC Power
2. Redundant AC Power
3. Single 24VDC or 48VDC Power
4. Redundant 24VDC or 48VDC Power
Figure 2-2. 9145E10G Rear Panel
2.3 Service Data Ports
The User and Network ports on both 9145E10G models (see Figure 2-1) provide XFP connec-
tors. The Multi-Purpose Port (9145E10G Model 527 only) provides both fixed UTP and SFP con-
nectors. The user can configure the 9145E10G Multi-Purpose port through the software to allow
for either the UTP or SFP connector to be active. Both connectors can not be active simultane-
ously.
• The User port and Network port XFP connectors support 10G operation only.
• The Multi-Purpose port UTP connector is IEEE 802.3 compliant for 10/100/1000BASE-T.
• The Multi-Purpose port UTP connector supports MDI and MDIX connections.
• The Multi-Purpose port SFP connector supports full-duplex operation at 1000 Mbps.