CANOGA PERKINS 9145EMP Network Interface Device Hardware - Manual (Page 24)

9145EMP Network Interface Device Hardware User’s Manual Functional Description
LED Indicators
12
2.6.6 AC/DC Power Base Unit
The AC/DC powered 9145EMP base unit (Figure 2-8) has two power interfaces on the rear-
panel, one that supports DC power input and one that supports an AC power input. An appropri-
ate AC power cord and a DC terminal block are supplied with the unit.
Figure 2-8 AC/DC Power
2.7 LED Indicators
The following paragraphs describe the functions of the LED indicators (Figure 2-9) on the
9145EMP base unit.
Figure 2-9 LED Indicators
POWER LED
STATUS LED
SPD LED
LNK/ACT LED
LNK/ACT LED SPD LED
SPD LED
USER PORT
USER PORT
NETWORK PORT
NETWORK PORT
LNK/ACT LED