CANOGA PERKINS 9145EMP Network Interface Device Hardware User Manual
Page 35
Advertising
![background image](/manuals/651393/35/background.png)
Installation
9145EMP Network Interface Device Hardware User’s Manual
Mounting Options
23
Figure 3-9 9145EMP Wall Mount Template
3.3.3 Horizontal Flat Surface Mounting
The 9145EMP requires at least one inch of unobstructed space around the perimeter for ventila-
tion. Canoga Perkins recommends a space of 3 to 5 inches be left unobstructed to allow for SFP
module access, cable access and power connections. To install the 9145EMP on a flat surface,
place the 9145EMP on a secure flat surface such as a table, a shelf, or a desk within reach of the
power and fiber optic cables. Connect the power and fiber optic cables to the 9145EMP as
required.
Advertising